FAQ – Frequently asked questions
Account & training
What do I need before I can fill?
You need a DiveAir account (which requires an email address), credit and valid training completed no more than a year ago. You must also be of legal age (at least 18 years old). Your tank needs a valid inspection date (TÜV, in Switzerland SVTI/EGI) and at least 10 bar residual pressure.
Why do I need training?
The law requires annual training on the filling system. Our online training takes just a few minutes and is valid for one year – we’ll remind you in the dashboard in good time before it expires. You’ll find the content in the training material and the filling instructions.
Can I change my account information?
Yes. You can change your personal details, including your currency, in the dashboard under “Your activities” → “Change your account information”. You can’t currently change your email address yourself – please contact our support team for that. (Contact us)
My location doesn’t show up on the map. What’s wrong?
Usually your browser doesn’t have permission to share your location – you can change this in the settings of your phone or browser. You’ll find instructions for iPhone and Android here. The map itself is only shown if you allow analytics cookies. Without your location, you can also choose the station in the dashboard via “Select station directly”.
Can I fill using my laptop?
Yes. Without location sharing, choose the station via “Select station directly” and confirm on site with the green start button. A phone is more practical, though, because you should stay with your tank during the fill.
Credit & billing
Which payment methods are accepted?
You top up your credit via our payment provider Stripe – e.g. by credit card; the Stripe payment page shows which payment methods are available. Payment cookies must be allowed for this. Credit is usually added within a few seconds of payment.
I topped up my credit but it hasn’t been added – what’s going on?
Credit usually arrives within a few seconds of payment. Reload the page after a few minutes. If it’s still missing, please contact our support team. (Contact us)
How does billing work?
The station measures the litres filled itself. You pay the price of the station you use (stated per 1,000 litres, minus your discount group’s discount where applicable). You can see litres, cost and pressure live while filling. The amount is deducted from your credit; you can create invoices as PDFs under “Your activities”.
Can my credit go negative?
No. Before starting, you’ll see roughly how many litres your credit will cover. The station fills at most as much as your credit covers, and you’ll never be charged more than your available credit. If it runs out during the fill, the station stops – close the tank, top up and start again.
Can I get an invoice?
Yes. You can create PDF invoices for fills and top-ups at any time in the dashboard under “Your activities” → “Create invoice”.
What is a discount group?
Discount groups are customer lists set up by station operators that receive special discounts. Just ask the operator of your local station.
Filling & procedure
I’m standing right in front of a station – why can’t I fill?
Common reasons: your training is more than a year old, you have no credit, the station is currently in use (orange marker) or it has a problem (yellow or red marker). Click the marker for more details. You can fill at an available, green station.
The station is busy – what now?
Only one person can fill at a station at a time. If someone is using it, you’ll see “Station busy” – even before you confirm the inspection date. Keep the page open: as soon as the station is free, “Start now” appears automatically. There’s no waiting list – whoever starts first fills first.
What do the marker colours on the map mean?
Green = available and ready for use, orange = in use (with “for X min”), yellow = storage pressure currently too low (often with “ready again in approx. X min”), red = malfunction or disconnected, blue = coming soon, purple = winter break. The map refreshes every 30 seconds. It is only shown if you allow analytics cookies.
Why do I have to press the green start button on the station?
It confirms that you’re really standing at the station. If you press it up to one minute before starting, this step is skipped.
Why won’t the fill start?
Common reasons: less than 10 bar residual pressure (in which case we don’t fill, for safety reasons), the tank valve isn’t fully open, the tank is already full (for topping up, the tank pressure must be more than approx. 10 bar below the final pressure), the station’s storage pressure is currently too low (yellow marker – the compressor is refilling) or the red emergency stop button is still pressed. The message in the fill assistant tells you which applies.
What pressure are tanks filled to and how long does it take?
Up to 225 bar – the tested safety valve doesn’t allow more. A fill takes no more than 10 minutes (5 minutes at stations with older controls); after that it stops automatically, but you can carry on filling straight away. If your tank is rated for less than 225 bar, end the fill yourself in good time (tap “Stop” and close the tank valve) – this is your own responsibility.
Can I fill several tanks one after another?
Yes. After “Tank closed”, confirm the inspection date of the next tank (and select it from “My tanks” if applicable), connect it (valve closed) and tap “Fill another tank” – it then continues with the pressure test.
My phone screen switched off while filling – what happens?
Nothing bad: a running fill is never interrupted by this, and nothing is vented. The station fills up to 225 bar, until the maximum fill time is reached or until your credit runs out. If your phone doesn’t respond for a while (approx. 30 seconds before filling, otherwise approx. 70 seconds), only the web session ends. When you reopen the page, you’ll see “Filling finished” with litres and cost. The fill hose is then still under pressure: close your tank valve and press the red emergency stop button on the station – it vents the hose automatically. Then release the button and unscrew the tank. Even so, stay with your tank for the entire fill.
Can I top up a tank?
Yes. Topping up means that a tank that has already been filled has cooled down and lost pressure as a result – e.g. filled to 220 bar, cooled down to 200 bar – and you fill it up again. This works as soon as the tank pressure is more than approx. 10 bar below the station’s final pressure. If it’s only just below, the station reports “No pressure drop measured” when you open the valve – which means the tank is already full.
Is nitrox available?
Currently at one station: TG Biber (Switzerland). When you’re there, the yellow “Start nitrox filling” button appears next to “Start filling” – it starts the fill on the nitrox hose. The procedure is the same as for compressed air; you’re charged this station’s nitrox price (before starting, you’ll see how many litres your credit will cover). Requirements: a valid nitrox certification and a tank that is suitable for nitrox and marked accordingly. Measure the oxygen content yourself before the dive and note it on the tank.
The station isn’t responding – what should I do?
After each step, DiveAir waits for the station’s response. If none arrives after approx. 60 seconds, a notice with “Try again” appears. If the problem persists, check the station’s marker (red = malfunction/disconnected), close your tank and get in touch with us. You’re only charged for what the station actually filled. (Contact us)
Safety & emergency stop
Is it safe to operate the stations?
Safety is a key focus of the DiveAir system. Our stations fill to a maximum of 225 bar and are protected against overpressure by a tested safety valve; the fill hose is kept short to prevent it from whipping. The fill stops automatically if pressure drops and after the maximum fill time, and you can stop the station immediately at any time with the red emergency stop button. You are responsible for your tank’s permitted pressure: if it is below 225 bar, end the fill in good time (tap “Stop” and close the tank valve).
What happens when I tap “Stop”?
During the fill, DiveAir sends the stop command to the station and waits for its confirmation; it then moves on to “Close tank”. Close your tank valve immediately after tapping – at stations with older controls, the fill only ends then (or when the tank is full); newer ones stop after about a second. In other steps, “Stop” cancels the process and vents the fill hose – close your tank valve first if it’s open.
When do I press the red emergency stop button?
Whenever there is any danger or if something seems wrong (hissing, a leak, a damaged hose). The emergency stop immediately closes the fill valve and vents automatically – if your tank valve is open, air will also escape from the tank. Your session ends. Close the tank, release the button and start again if needed. Please let us know what happened. (Contact us)
Tanks & TÜV
Why do I have to confirm the inspection date (TÜV) before starting?
Tanks whose periodic inspection (TÜV, in Switzerland SVTI/EGI) has expired must not be filled in AT, DE and CH. That’s why you actively confirm before every fill – and for every additional tank – that the inspection date is valid. Not sure? Our help page Checking your tank inspection (TÜV) shows what a valid stamp looks like. If in doubt: don’t fill.
How can I tell whether my tank’s TÜV is valid?
The inspection stamp is usually stamped into the shoulder of the tank. It normally shows the month/year of the last inspection – add the inspection interval that applies in your country; some stamps show the due date directly. Our help page Checking your tank inspection (TÜV) shows you exactly what this looks like. If in doubt: don’t fill.
What is “My tanks”?
Under “My tanks” in the dashboard, you can save your tanks with their name, volume, serial number and the month/year until which the inspection is valid. From 6 months before expiry, we remind you in the dashboard. Tanks with an expired inspection are blocked at the start and for “Fill another tank” – after the new inspection, simply enter the new date.
Data
Is my data safe? Is my credit card information stored?
We don’t store credit card numbers or any other payment data – payments are handled by our payment provider Stripe. Your personal data is protected using modern security methods. Fills, top-ups and training sessions are stored and linked to your account – this is required for the mandatory documentation (compressor log) and for your invoices. You’ll find details in our privacy policy.
How can I close my account and delete my data?
We can close your account immediately and delete all your data after the statutory retention period. Please contact our support team to do so. (Contact us)
Supporting DiveAir & buying a station
How can I support the DiveAir network?
Feel free to recommend us – in conversation and on social media – and rate us on Google and Facebook.
How can I buy a station?
You’ll find our current offers and prices under “Become a partner”. You can also contact us directly. (Contact us)
Can’t find your question? Take a look at the Guides, the filling instructions or the training material, or write to us.
Home page