Transporting and storing dive tanks
A filled dive tank is under high pressure. With a few rules, it stays safe in transit and lasts for many years in storage.
In the car
- Valve closed, ideally protected against knocks with a valve cap.
- Transport the tank lying down and secured – it must not roll or slide when you brake.
- Don’t leave it in the sun or in a hot car: the pressure rises with temperature, by roughly 0.7 bar per degree.
- Don’t put it straight into a hot boot after filling – the tank is already warm from filling anyway.
Storing at home
- Cool and dry, protected from direct sunlight and heaters.
- Upright and secured against falling over, or lying down so that it can’t roll away.
- Never store it completely empty: residual pressure prevents moisture from getting in. For safety reasons, we don’t fill below 10 bar.
- Keep children and unauthorised persons away.
Care after diving
- After salt water, rinse the tank and valve with fresh water and let them dry.
- Check the O-ring on the valve for dirt, cracks and deformation – a good O-ring saves you error messages during the pressure test.
- Dents, corrosion or heat damage? Then stop filling it and have it checked by a specialist dealer.
- Keep an eye on the inspection date – under “My tanks”, we remind you 6 months before it expires.
⚠️ Never leave a tank overnight in a car parked in the sun. In extreme heat, the pressure can rise well above the working pressure.
Frequently asked questions
Why does my tank show less pressure after cooling down?
The tank warms up during filling. When it cools down, the pressure drops – but the air is still there. More on this in the guide “Topping up your tank”.
Should I store the tank full or half full?
Above all, it’s important that it’s never completely empty. Store it in a cool, dry and secure place.
What should I do with a tank that was completely empty?
Don’t fill it yourself: moisture may have got into an empty tank. Have it checked by a specialist dealer.
More guides:
Filling your own dive tank – here’s howYour first fill – checklistUnderstanding error messages at the stationWhich tank is right for you? 200, 232 or 300 barTopping up your tankFilling nitrox yourselfHow clean is the breathing air?Your own self-service filling station Checking your tank inspection (TÜV) FAQ
Filling your own dive tank – here’s howYour first fill – checklistUnderstanding error messages at the stationWhich tank is right for you? 200, 232 or 300 barTopping up your tankFilling nitrox yourselfHow clean is the breathing air?Your own self-service filling station Checking your tank inspection (TÜV) FAQ