Guides

Filling your own dive tank – here’s how

At a DiveAir station, you fill your dive tank yourself, around the clock, controlled from your phone. A tank usually takes just a few minutes.

What you need

How the fill works

  1. Log in and tap “Start filling” in the “Fill” section. If the station is currently busy, keep the page open – as soon as it’s free, “Start now” appears.
  2. Confirm the inspection date and press the green start button on the station – this shows that you’re on site.
  3. Connect the tank, tighten the handwheel firmly, keep the tank valve closed and tap “Tank connected”. The station runs a pressure test to check that everything is tight.
  4. Slowly open the tank valve fully and tap “Tank opened”. The fill runs – you can see pressure, litres and cost live.
  5. The station stops by itself at the final pressure (up to 225 bar). Then close the tank valve and tap “Tank closed” – the station vents the hose.
  6. Unscrew the tank. Now tap “Fill another tank” or “Finish filling” – you’re only charged for what the station has filled.
⚠️ Stay with your tank during the fill. If your tank is rated for less than 225 bar, end the fill yourself in good time: tap “Stop” and close the tank valve. In case of danger, press the red emergency stop button – the station shuts off immediately and vents automatically.

Frequently asked questions

How much does a fill cost?

Each station has its own price per 1,000 litres – you can see it on the map and on the station’s page. You’re charged for the litres the station measures, and never more than your available credit.

How long does a fill take?

Usually just a few minutes per tank, depending on the tank size and residual pressure. For safety reasons, a fill stops after 10 minutes at the latest; you can carry on filling straight away.

What happens if my phone screen switches off?

A running fill carries on. When you reopen the page, you’re in the right step. If your session ends because your phone hasn’t responded for a while, close the tank valve and press the red emergency stop – the station then vents the hose.

Can I fill several tanks one after another?

Yes. After “Tank closed”, tap “Fill another tank”, confirm the inspection date of the next tank, and it continues with the pressure test.

Create account Stations near you
More guides:
Your first fill – checklistUnderstanding error messages at the stationWhich tank is right for you? 200, 232 or 300 barTopping up your tankTransporting and storing dive tanksFilling nitrox yourselfHow clean is the breathing air?Your own self-service filling station Checking your tank inspection (TÜV) FAQ