Which tank is right for you? 200, 232 or 300 bar
What matters is the working pressure stamped on your tank. DiveAir stations fill up to 225 bar – for 200 bar tanks, you have to end the fill yourself in good time.
Reading the working pressure
- The working pressure is marked on the shoulder of the tank: PS, on older tanks PW or WP – e.g. “PW 200”.
- The higher test pressure (PT, formerly PH/TP) is only for the inspection – tanks are never filled to that level.
- You’ll usually find the inspection stamp right next to it – see Checking your tank inspection (TÜV).
What this means at the station
- 200 bar: the station would fill up to 225 bar. Keep an eye on the pressure and end the fill at 200 bar: tap “Stop” and close the tank valve.
- 232 bar: the station fills up to 225 bar – so the tank is almost full.
- 300 bar: the tank is filled up to 225 bar, i.e. about three quarters. That’s plenty for many dives.
How much air does it hold?
Rule of thumb: volume × pressure = litres of air. A 12-litre tank at 200 bar holds around 2,400 litres. What counts for the cost is how much is refilled: 12 litres from 50 to 220 bar is around 2,040 litres – so at a price of e.g. 4.00 per 1,000 litres, that’s about 8.20. You’ll find the price of each station on its station page.
Connection: DIN only
The stations only have DIN connections. Tanks with an INT (yoke) valve need a tested DIN-INT adapter – it is tolerated but not recommended; you are responsible for its suitability and inspection status yourself.
Frequently asked questions
Steel or aluminium – does it make a difference when filling?
Not when filling. All that matters is the working pressure, a valid inspection date and a DIN connection.
Why does DiveAir only fill up to 225 bar?
The station’s tested safety valve doesn’t allow more. This means a fill suits most 232 and 300 bar tanks and protects against overpressure.
Can I fill a 200 bar tank without worrying?
Yes, as long as you end the fill yourself at 200 bar: tap “Stop” and close the tank valve. To do this, stay with your tank during the fill.
Filling your own dive tank – here’s howYour first fill – checklistUnderstanding error messages at the stationTopping up your tankTransporting and storing dive tanksFilling nitrox yourselfHow clean is the breathing air?Your own self-service filling station Checking your tank inspection (TÜV) FAQ