Guides

Topping up a dive tank

Topping up means that a tank that has already been filled has cooled down and lost pressure as a result – and you fill it up again. At a DiveAir station, this works as soon as the pressure is more than approx. 10 bar below the station’s final pressure.

Why does the pressure drop after filling?

When filling, the air is compressed and warms up the tank. When it cools down afterwards – in the car, in the water, overnight – the pressure drops. An example: filled to 220 bar, only around 200 bar after cooling down. The air is still there; it just exerts less pressure when it’s cold.

How to top up

  1. Let the tank cool down – ideally for a few hours, or briefly in cold water.
  2. Start as usual: confirm the inspection date, connect the tank, pressure test.
  3. Open the tank valve and tap “Tank opened”. If the tank pressure is more than approx. 10 bar below the final pressure, the fill starts.
  4. If it’s only just below, the station reports “No pressure drop measured” – which means the tank is already full. Tap “Stop” and close the valve.
⚠️ Never exceed the permitted pressure: topping up doesn’t change the working pressure stamped on your tank. If it is rated for less than 225 bar, end the fill yourself in good time.

Frequently asked questions

Is topping up charged extra?

No – as always, you’re only charged for the litres the station actually fills, and when topping up, that’s usually only a few.

Why does the station report “No pressure drop measured”?

Either the tank valve isn’t fully open – in that case open it fully and try again – or the pressure in the tank is already close to the station’s final pressure. Then the tank is full.

Can I top up an empty tank?

No. For safety reasons, we don’t fill below 10 bar residual pressure – moisture can get into an empty tank. Have it checked by a specialist dealer.

Create account Stations near you
More guides:
Filling your own dive tank – here’s howYour first fill – checklistUnderstanding error messages at the stationWhich tank is right for you? 200, 232 or 300 barTransporting and storing dive tanksFilling nitrox yourselfHow clean is the breathing air?Your own self-service filling station Checking your tank inspection (TÜV) FAQ